Detailed Product Description

Teracoms TAD Series ADSL2+ Modem uses best in industry standard new generation Chipset solutions for providing high speed broadband and fully complies with ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. 

Two data communication equipments can be simultaneously connect either through USB port, Ethernet port, or both to share high-speed Internet access. Ethernet port providing connectivity regardless of the operating system in use or connect to USB port for USB equipped DCE thus performs plug & play use.

    An integrated firewall provides online security. Built-in connectivity (PPPoE and PPPoA) means that there is no need for PC software to make an Internet connection. ADSL service parameters are auto - elected upon connection to an ADSL line.

Specification:
ITU-T G.992.1 (G.dmt), G.992.2 (G.lite) Standard,
ITU-T G.992.3 (ADSL2 DMT), G.992.5 (ADSL2+) Standard
Data Transmission Rate
Upstream: Up to 1 Mbps. Downstream: Up to 24 Mbps.
Maximum Transmission Range: 6.5 Kms
Interoperable with all major DSLAM equipment
Full Speed, Auto sense ADSL Routing, Bridging

ATM Protocols:
RFC2364 PPP over ATM ALL5
RFC2516 PPP over Ethernet
RFC2225/RFC1577 Classical IP over ATM
Transparent Bridge
ATM Forum UNI 3.1/4.0 PVC
VPI Range (0-255) and VCI range (1-65535)
ATM Layer with Traffic shaping (UBR/CBR)

Network Support:
Static IP, Dynamic RIP, RIP V2 support, VPN pass-through support
Network Address Translation (NAT)
DHCP Server/Relay Support
8 PVC Support
DMZ Support

Management Support:
Friendly GUI for Web based configuration
Upgrade or update via FTP/HTTP
Command Line Interface via serial interface or Telnet
Diagnostic Test
Remote Management, Local web based firmware up gradation
SNMP Support, TR-069 Support (Optional)

Security Support:
PAP/CHAP Authentication for PPP mode
NAT for basic Firewall support
(User/Admin) Password Authentication to Modem